3D printing

ANSI Z87.1 Clear Safety Glasses — 36-Pack Protective Eyewear

4.6 8 reviews 2 min read

ANSI Z87.1 Clear Safety Glasses — 36-Pack Protective Eyewear

Product description

This set contains thirty-six individually wrapped clear safety glasses, ideal for supplying teams, visitors, classrooms, or job sites. Each pair is sealed to keep the lenses clean and ready for immediate use.

Frames and lenses are molded from durable polycarbonate and designed to conform to ANSI Z87.1 impact requirements. The lenses are treated with a scratch-resistant finish to extend usable life and simplify cleaning, and the wraparound shape includes extended side shields for extra peripheral defense.

The eyewear is engineered to be very lightweight and flexible so it conforms comfortably to a wide range of face shapes. Soft rubber tips on the temples help reduce slipping and make them easier to wear for hours during tasks like cutting, sanding, or assembly.

High-definition polycarbonate lenses are manufactured to minimize optical distortion while preserving a wide field of view. The design balances direct and peripheral protection so flying particles and debris are less likely to reach the eye from the sides or front.

These glasses are versatile for many situations: construction and factory work (installation, sanding, cutting, painting), maintenance and electrical wiring, automated shop tasks, laboratory experiments, shooting ranges, and other indoor or outdoor activities where basic eye protection is required.

Pros

  • ANSI Z87.1 rated impact protection
  • Individually wrapped for hygiene and distribution
  • Lightweight fit with soft rubber temple tips

Cons

  • Some units may show minor manufacturing defects
  • Lenses can scratch under heavy or abrasive use
  • Anti-fog performance not guaranteed in all conditions

VerdictA cost-effective bulk solution for supplying basic eye protection across a workplace or project. The polycarbonate lenses meet ANSI Z87.1 impact standards and offer wraparound coverage with scratch-resistant coating. Lightweight frames and soft temple tips deliver all-day comfort for most wearers. Quality control can vary, so inspect pairs before use, but for general construction, labs, and mainte

Reviews

  1. Kukana 5/5

    Good fit and side coverage

    They fit comfortably and kept debris out while I cleared moldy leaves. Vision stayed clear.

  2. JB 5/5

    Durable, disposable pairs

    I’m rough with eyewear — lose and scratch them. These are affordable and hold up for daily use.

  3. happy reader 4/5

    Functional, not flashy

    They scuff more than they break. I stash pairs around the shop and keep using them even when scratched.

  4. T. M. 5/5

    Useful for helpers on the farm

    I leave extras for helpers at the tool barn. They’re convenient and perform nearly as well as my regular pair.

  5. Sarah Yeakle 3/5

    Mixed quality in the box

    A portion had rough plastic on the nose bridge and were unusable. The rest were comfortable. Liked the mix of clear and tinted.

  6. Gary 5/5

    Value and quick delivery

    Solid value and arrived quickly.

  7. Rodolfo J. 5/5

    Clear vision, solid protection

    Provides strong protection and offers sharp, unobstructed sight.

  8. Mona 5/5

    Comfortable for long wear

    Wore them all day and mostly forgot they were on. Snug around the eyes while cutting metal. No fogging during this test; glad for the many pairs.

Comments

No comments yet.

Sign in or sign up to comment.

  1. PEI Spring Steel Build Plate — 260x271mm for Centauri Carbon/CC Series
    3D printing

    PEI Spring Steel Build Plate — 260x271mm for Centauri Carbon/CC Series

    4.6 8 reviews A 260x271mm double-sided textured PEI spring steel build plate made for Centauri Carbon and CC-series machines. Textured PEI on both faces, easy adhesion around 60°C, flexible spring steel for pop-off removal, simple peel-and-place installation, and long-term durability for frequent printing.
  2. DC32-00007A Dryer Thermistor Replacement (3-Pack) — Upgraded Part
    3D printing

    DC32-00007A Dryer Thermistor Replacement (3-Pack) — Upgraded Part

    4.2 13 reviews Three-piece DC32-00007A thermistor kit that replaces PS4204984, AP4201716, N3S1-K41, 2068429 and related numbers. Compact temperature sensor for many Samsung, Kenmore and similar dryer models. Monitors drum heat and reports resistance changes to the control board to regulate the heater and prevent o
  3. Phomemo PM241BT Bluetooth Shipping Label Printer with Starter Labels
    3D printing

    Phomemo PM241BT Bluetooth Shipping Label Printer with Starter Labels

    4.7 13 reviews Compact thermal label printer offering Bluetooth and USB connectivity for phones, tablets and computers. Supports 1–4.6 in labels, prints black-and-white via direct thermal tech at up to 150 mm/s, and ships with starter labels and cables. Works with common seller platforms and prints barcodes, QR co
  4. Creality CFS Feed and Return Kit — Replacement Filament Feed Unit
    3D printing

    Creality CFS Feed and Return Kit — Replacement Filament Feed Unit

    2.3 3 reviews Official Creality replacement for the CFS filament management system. Includes a 24V brush motor, pneumatic connector and two PTFE guide tubes (200mm & 230mm). Designed to assist feeding and returning multicolor filament and to integrate with the CFS refueling sequence.
  5. 10-Pack Deep Beehive Frames with Beeswax-Coated Foundations (Langstroth Deep)
    Beekeeping

    10-Pack Deep Beehive Frames with Beeswax-Coated Foundations (Langstroth Deep)

    4.9 8 reviews Ten deep wooden frames designed for Langstroth deep brood boxes, each fitted with a black, food-grade plastic foundation dipped in pure beeswax. Frames are made from FSC-certified pine and include top bars, bottom bars, sidebars and nails for assembly. Standard deep size (9-1/8" x 19" x 1-3/8"). Eas
  6. Rhino USA Retractable Ratchet Straps — 4-Pack, 1in x 10ft (Black)
    Automotive

    Rhino USA Retractable Ratchet Straps — 4-Pack, 1in x 10ft (Black)

    4.9 10 reviews Four 1in x 10ft retractable ratchet straps in black, designed for quick one-button retraction and heavy-duty tie-downs. Includes four soft-loop anchors and rugged hardware for securing gear on trucks, roof racks, trailers, ATVs and more.
  7. Caffeinated Hot Cinnamon Sunset Black Tea Tin — 20 Pyramid Sachets
    Coffee and tea

    Caffeinated Hot Cinnamon Sunset Black Tea Tin — 20 Pyramid Sachets

    4.4 13 reviews A Chinese black tea blended with three kinds of cinnamon, orange peel and cloves. Comes as 20 pyramid sachets in a reusable tin, naturally caffeinated and suitable for hot or iced brewing. Producer supports 1% for the Planet.
  8. Hand-Painted Wooden Russian Nesting Dolls — 6-Piece Matryoshka Set
    Building toys

    Hand-Painted Wooden Russian Nesting Dolls — 6-Piece Matryoshka Set

    4.8 5 reviews A 6-piece hand-painted wooden matryoshka collection featuring a blue-and-white folk motif. Largest doll measures about 14.5 cm. Smooth two-part joins let each figure nest inside the next for sorting, display, travel play and gifting to kids or adults.
  9. Flower-Shaped Silicone Chocolate Candy Mold Set (6-Pack)
    Baking

    Flower-Shaped Silicone Chocolate Candy Mold Set (6-Pack)

    4.8 10 reviews Six flexible silicone trays, each with 15 small cavities in assorted floral and motif shapes, for making chocolates, candies, soaps, wax melts and more. Heat- and cold-resistant from -40°F to 446°F (-40°C to 230°C). Compact, easy-release molds sized for handheld treats and DIY projects—dishwasher, m
  10. Carnation Evaporated Lowfat 2% Milk — 12 oz Can
    Grocery

    Carnation Evaporated Lowfat 2% Milk — 12 oz Can

    3.0 4 reviews A single 12-ounce can of lowfat evaporated milk fortified with vitamins A and D. Canned and shelf-stable until opened, it's used to enrich coffee, sauces, soups, baking, and recipes that call for a creamier texture than regular milk.