Welding
3/4" Fuel Transfer Hose — 10 ft Heavy-Duty Gas & Diesel Line
Product description
Size and length
Inner diameter: 3/4 inch (19 mm). Outer diameter: 28 mm. Overall length: 10 feet (3.05 m).
Construction and materials
The hose features a fuel-compatible nitrile (NBR) inner tube designed to resist petroleum products and many biodiesel blends. The reinforcement layer is a braided fiber matrix that gives strength and pressure resistance. The outer jacket is a blended PVC and nitrile compound to improve abrasion resistance and weatherability. An internal spring guard helps prevent kinking at fittings, and a stainless steel grounding wire runs along the length for static dissipation.
Performance ratings
Working pressure: 300 PSI. Bursting pressure: approximately 1160 PSI. Operating temperature range: -40°F to 257°F, making it suitable for cold and hot environments.
What's included and typical use
Supplied as a 10 ft length of hose with the integrated spring guard and ground wire; fittings are not included unless specified separately. Intended for fuel transfer and dispensing tasks handling gasoline, diesel, kerosene, propane, B-20 and other biodiesel blends, E10/E85/E100 fuels, mineral oil, petroleum-based oils and some grease transfer applications. Install with compatible fittings, routinely inspect for soft spots or damage, and replace if any deterioration or leaks appear.
Pros
- Fuel-resistant nitrile inner tube
- Reinforced for higher pressure use
- Integrated anti-kink spring and grounding wire
Cons
- Fittings not included by default
- Some reports of inconsistent quality
- May be heavier than consumer-grade hoses
VerdictA rugged 3/4" fuel transfer hose built for demanding fueling tasks. It combines a fuel-resistant nitrile inner tube, braided fiber reinforcement and a mixed PVC/nitrile outer jacket, plus an anti-kink spring and grounded stainless wire. With a 10 ft length, 300 PSI working pressure and a very wide operating temperature range, it suits many liquid fuels and on-site dispensing setups. Some users rep
Reviews
-
Logan 5/5
Works great
Performs as expected.
-
J. MICHEL 5/5
Very robust
Feels industrial-grade — far sturdier than typical station hose. Expect long service life.
-
Roman 1/5
Late delivery and failure
Extremely long delivery time and the hose developed leaks within days — unacceptable.
-
Nuts 4/5
Flexible and strong
Very pliable yet durable.
-
D. Rogers 5/5
Excellent quality
High-quality hose, the length is ideal. Installation was fast and uncomplicated.
-
Brent Pausch 1/5
Failed on first use — ballooning and fumes
10 ft hose failed after first use with internal swelling and fuel odor. Installed weeks after purchase and discovered very soft spots where the inner tube ballooned and vented gasoline fumes near my trailer fueling station. Expecting manufacturer replacement due to unsafe condition.
-
John Driggers 5/5
Performs well
Does the job reliably.
-
Claude brassard 5/5
High-quality fit
Very good quality. Fits the nozzle and pump very well.
-
Donna Norton 5/5
Good fit
Matched my fittings and functions properly.
-
Mary McDonald 5/5
Meets expectations
Exactly what I needed — solid construction and proper fit.
-
Nick Patel 1/5
Disappointed in quality
Material quality was below expectations.
-
John Biddle 5/5
Did the job
Functioned without issues.
-
Jeremy Rach 5/5
Solid product
Good construction and arrived promptly.
Comments
No comments yet.
Sign in or sign up to comment.