PC gaming

31.5-inch Wood Monitor Stand Riser with LED and Adjustable Acrylic Legs

3.6 12 reviews 2 min read

31.5-inch Wood Monitor Stand Riser with LED and Adjustable Acrylic Legs

Product description

This riser ships as a two-panel wooden top, a set of clear acrylic legs with hardware, an LED light strip with USB power cable, and assembly instructions. The top spans 31.5 inches and is pre-drilled for straightforward installation.

The platform is constructed from a wood composite surface and supported by transparent acrylic legs. The legs insert into the top and offer two stable height options: approximately 2.75 inches or 1.57 inches. The entire assembly is rated to support up to 33 pounds, suitable for typical desktop monitors and peripheral devices.

The included RGB LED strip attaches under the front edge and connects via a directional plug. If the illumination doesn’t power on, try reversing the connector; the strip cycles through 24 color choices and four lighting modes to set different moods.

Because the top is made from two joined panels, a narrow seam is visible down the center. The design lifts the screen to an ergonomic viewing level and creates usable storage underneath for keyboards, notebooks, or accessories, making the most of limited desk depth.

Assembly is simple thanks to the pre-drilled holes and supplied fasteners; follow the instructions to choose your preferred leg height. Beyond elevating a monitor, the riser can double as a stand for laptops, printers, or as a desktop organizer to reclaim workspace.

Pros

  • Two selectable heights to improve ergonomics
  • RGB lighting with multiple colors and modes
  • Supports up to 33 pounds and frees desk space

Cons

  • Top consists of two joined panels with a visible seam
  • Feet may lack non-slip pads out of the box
  • LED connector is directional and may require reversing

VerdictThis 31.5-inch wood monitor riser offers a clean, modern look and useful features: two height settings, durable acrylic supports, and an RGB LED strip with 24 colors plus four effects. It’s sturdy enough for most displays up to 33 pounds and helps tidy a workspace. Some users report the LED connector needs reversing to power on, and the unit is made of two top panels rather than a single solid sla

Reviews

  1. Kate 5/5

    Adorable and Well Made

    Looks great and feels solid. The top pieces are separate panels rather than a single slab, but the rubber grips on the bottom hold fine unless you drag them around. Fits my two 27-inch displays when angled and is the cutest option I found.

  2. Present moment 3/5

    Attractive but Slippery

    Good materials and looks, but feels flimsy. I wouldn’t trust two monitors on it; I use a single large display. The acrylic feet have no grip and slide easily.

  3. Angelina 1/5

    Failed to Hold My Monitor

    Design is flawed for heavier displays — it wouldn’t support the weight of my monitor.

  4. Vincent Nguyen 4/5

    Stylish but Lightweight

    Nice looking and modern. I wished the wood felt heavier or more premium — it’s pretty light overall.

  5. Robert Stefaniszyn 5/5

    Good for TVs

    Performs well when used with a TV.

  6. aisia beamon 5/5

    Does the Job

    Cute and sturdy enough for daily use. I’ve had mine since September and it’s been easy to put together, clean and move as needed.

  7. #BBDI 5/5

    Fast Assembly

    Solid product and very quick to set up.

  8. em 5/5

    Compact and Space-Saving

    Needed a shallower option for a slim desk and this fit the bill under 8 inches depth. Super cute, quick to assemble and fairly stable as long as weight is centered.

  9. Liza Gomez 1/5

    LED Strip Arrived Dead

    The stand is decent and you can see the seam between the boards. The LED strip that came with mine didn’t work, so I can’t enjoy the lighting feature I bought it for.

  10. A 3/5

    Too Light, Needs Grip

    Nice concept but it’s very lightweight and slides with little force. I worry about accidental bumps or tugged cords. Rubber stoppers would help; the split top also shows a visible gap.

  11. Vidya Mohan 1/5

    Poor Design, Returning

    No mechanism to fasten the three pieces together; the side pieces simply rest on the center, leaving a wide gap. It doesn’t feel structurally safe for a monitor. Returning it.

  12. CC 5/5

    Low Profile with Two Height Choices

    Clean, minimalist look and very low rise. I appreciated the two height settings and easy setup — pick leg height and attach. The top sits on wooden pegs rather than locking together. Instructions mention silicone foot pads, but mine were not included; seems the seller may have stopped supplying them.

Comments

No comments yet.

Sign in or sign up to comment.

  1. ARCTIC P12 Pro A-RGB LN — 120 mm Low-Noise PWM Case Fan
    PC gaming

    ARCTIC P12 Pro A-RGB LN — 120 mm Low-Noise PWM Case Fan

    4.2 10 reviews A 120 mm PWM fan engineered for quiet systems: the LN variant offers a 450–2000 RPM range with 0 RPM idle, fluid-dynamic bearing, refined blade geometry and a Y-cable splitter for addressable RGB setups.
  2. EPOMAKER Creamy Jade 45g Linear Mechanical Keyboard Switches — 100-Pack
    PC gaming

    EPOMAKER Creamy Jade 45g Linear Mechanical Keyboard Switches — 100-Pack

    4.9 12 reviews Smooth, factory-lubed linear switches with a POK stem, PC upper and PA66 bottom housing. 5-pin MX-compatible design, 45±5gf actuation, 50±5gf bottom-out and rated for 50 million keystrokes.
  3. Thrustmaster T-Flight Hotas One Collector Edition — Flight Stick for Xbox & PC
    PC gaming

    Thrustmaster T-Flight Hotas One Collector Edition — Flight Stick for Xbox & PC

    4.2 13 reviews Officially licensed for Microsoft Flight Simulator 2024, this HOTAS bundle pairs a 5-axis, 10-bit precision joystick with a detachable throttle. It includes a multi-direction hat switch, 14 action buttons, adjustable stick resistance, Z-axis rudder control and a S.M.A.R.T. sliding rail for optional
  4. Upgraded Wooden Guinea Pig Castle with Ramp and Roof Mat
    Small pets

    Upgraded Wooden Guinea Pig Castle with Ramp and Roof Mat

    4.9 7 reviews A solid wooden hideout designed for guinea pigs and other small pets, featuring easy screw-together assembly, a soft reversible roof mat, dual entrances, and a plush-covered ramp. Compact footprint fits most cages and gives pets places to hide, climb, and rest.
  5. Non-Slip Bench Cushion — Velvet Tufted Bay Window & Seat Pad
    Home decor

    Non-Slip Bench Cushion — Velvet Tufted Bay Window & Seat Pad

    5.0 5 reviews A 4-inch thick velvet bench cushion with high-density foam and French tufting that works indoors or outdoors. Features a non-slip backing and a carry handle, offered in multiple lengths to fit bay windows, benches, and patio seats. Spot-clean care keeps the color fresh season after season.
  6. Ultra Berry Scent Car Air Freshener Vent Clips — 6-Pack
    Fragrance

    Ultra Berry Scent Car Air Freshener Vent Clips — 6-Pack

    4.1 11 reviews A six-pack of vent-clip car air fresheners scented in a berry blend. Each clip secures to most standard vents, offers three intensity settings, and uses a mix of essential and fragrance oils. Each unit lasts up to 30 days for a combined 180 days of scent.
  7. USDA Organic Rosehip Seed Oil (1 oz) — Pure Cold-Pressed Facial & Hair Oil
    Skincare

    USDA Organic Rosehip Seed Oil (1 oz) — Pure Cold-Pressed Facial & Hair Oil

    4.6 7 reviews A 1 oz bottle of USDA-certified organic rosehip seed oil, cold-pressed to preserve vitamins, antioxidants and essential fatty acids. Designed to deeply hydrate skin and hair, support tone and texture, and help diminish fine lines, scars and stretch marks.
  8. 72-Piece Cat Letter Writing Set — 8.3 x 5.6 in Cute Paper & Envelopes
    Stationery

    72-Piece Cat Letter Writing Set — 8.3 x 5.6 in Cute Paper & Envelopes

    4.9 8 reviews A 72-piece cat-themed correspondence kit with 48 lined sheets and 24 matching envelopes across four charming designs. Warm yellow paper (100gsm sheets, 120gsm envelopes) offers a vintage feel and smooth writing surface, sized for personal letters and pen pals. Ideal for gifts, journaling, scrapbooki
  9. Carbonized Black 3-Tier Jewelry Organizer Stand — Tall Necklace Holder
    Jewelry

    Carbonized Black 3-Tier Jewelry Organizer Stand — Tall Necklace Holder

    4.8 12 reviews Three-level jewelry stand with a wooden catch tray and rotatable T-bars to keep necklaces, bracelets, rings and earrings arranged and accessible. Solid wood and metal build, adjustable top post and a compact footprint for tabletop displays at home or events.
  10. Creality CFS Feed and Return Kit — Replacement Filament Feed Unit
    3D printing

    Creality CFS Feed and Return Kit — Replacement Filament Feed Unit

    2.3 3 reviews Official Creality replacement for the CFS filament management system. Includes a 24V brush motor, pneumatic connector and two PTFE guide tubes (200mm & 230mm). Designed to assist feeding and returning multicolor filament and to integrate with the CFS refueling sequence.