Automotive
YINTATECH Category 1 3-Point Quick Hitch — 3,000 lb Capacity
Product description
Quick to install: The YINTATECH Category 1 quick hitch is designed for straightforward assembly following the included instructions, helping reduce installation time and effort. It connects to standard Category 1 three-point linkages and also accepts a 2" ball in the receiver for alternate towing setups.
Durable construction: Fabricated from heavy-duty Q235 steel, the hitch has been powder coated to improve resistance to rust and corrosion, extending service life in outdoor and agricultural environments. The manufacturer reports an increase in plate thickness of roughly 20% compared with thinner designs to improve load capacity.
Dual-usage design: This hitch provides a multi-purpose solution via the three-point lower hooks and a 2" receiver. That makes it suitable for handling farm implements, moving small trailers, pallet work, stacking, and other short-distance transport tasks in farms, factories, and warehouses.
Rated capacity & adjustability: The assembly is rated at 3,000 pounds and includes a top hook with five adjustable positions so you can tune the attachment height without drilling or permanent changes. It is intended to bolt directly to most Category 1 tractors without welding or custom fabrication.
What’s included: The package contains the three-point hitch body plus one top pin and two bottom pins. Packaging is done in a BC carton with a stated minimum breakage resistance of 275 lbf/in² to protect the unit during transit and reduce deformation on long shipments.
Installation notes: No special tools or welds are required for standard attachment; however, users should verify pin sizes, receiver ball size, and hook spacing against their tractor and implements to ensure compatibility before heavy use.
Pros
- Heavy-gauge Q235 steel with powder-coating
- Works with 3-point linkage and 2" receiver
- 3,000 lb rating with five-position top hook
Cons
- Fit and pin sizes can vary between units
- Supplied tow ball or hardware may be undersized
- Relatively heavy — check tractor compatibility
VerdictSturdy, straightforward and versatile — the YINTATECH quick hitch is built from thick Q235 steel and accommodates both a Category 1 three-point hookup and a 2" receiver. Its 3,000 lb rating and multi-position top hook give useful flexibility for moving trailers and attachments without welding or permanent modification. Fitment can vary, and some buyers report missing or undersized hardware and com
Reviews
-
evan 3/5
Decent option but other brands considered
It works for my needs, though if I did it again I might choose a different brand for peace of mind.
-
Paul Barlow 3/5
Too large for my application, missing top pin
Very heavy-duty but larger than expected — hooks were wider than shown and it uses larger lower pins. The top pin was missing, so I returned it.
-
Cody 5/5
Functional despite missing small hardware
My unit was missing the nuts that secure the hook, but a quick trip to the hardware store fixed it and it functions as expected.
-
CobraXP 4/5
Good fit, but swap the ball for 2 5/16"
Hitch mounted cleanly with no weld flaws. My main issue was the ball mounting — I replaced it with a 2 5/16" ball, which I think should be standard, and tightening it securely without welding can be a challenge.
-
jeff 5/5
As described and well made
The unit arrived as described and feels well built.
-
Zac 4/5
Looks good but missing attachment pins
Build and finish were fine, but I did not receive the pins shown in the photos to mount it to my tractor.
-
ECPer 5/5
Very handy for moving trailers and implements
Used on a Kioti DK5020M to shuttle both a small bumper-pull trailer and a large gooseneck dump. Switching between trailers is quick: back up, lift with the 3-point, and drive away — I avoid using trailer jacks. It’s light enough for one person to maneuver and pin, and the welds and build feel solid. The 2" receiver lets me use a tri-ball setup; a hydraulic top link would make bale work even easier.
-
Wanda R. 5/5
Strong construction but small factory ball
Welds and frame are solid. The included ball is only 1 7/8", which fits very few trailers on my farm.
Comments
No comments yet.
Sign in or sign up to comment.